Pololu Power Cradle
Feed your Polystack with up to two amps with this Pololu voltage regulator cradle. The pin headers match the pinout of both the 1A and 2.5A Pololu regulators to simplify mounting them. Don’t have a Pololu regulator? Use your current regulator by feeding 5V, GND and battery pins directly instead.
The offset regulator design minimizes the height impact on the Polystack as a whole to just 3.1 total mm (1.5mm stacking height + 1.6mm board thickness). However, this means it may run into other things outside of the normal footprint. So, make sure you have the room!
- Retail Price: $8
- 1.5mm stacking height
- Cradles Pololu regulators or can be wired to other PDB.
- Includes 6S capable 10k:100k voltage divider for battery monitoring
- 4 + 1 extra ~1.5mm spacer
- 1 1x3 right angle header for use connecting to an off board regulator or PDB.
- 1 Chickadee Tech Spacer v3
- Pololu Voltage Regulator
- Pin Headers for mounting regulator (usually included with regulator)