X4R-SB
Integrate your depinned X4R-SB into your Polystack with this cradle to reduce wire count by three. Betaflight will automatically configure S.Bus and SmartPort (if connected) for the RC and telemetry links respectively. It also has a buzzer output! Either stack this on top or remove the telemetry plug to use its 4mm stacking height inside the stack.
Specifications
- Retail Price: $25
- Betaflight autoconfigures:
- S.Bus Serial RX
- SmartPort Telemetry
- Inversion
- Buzzer Pin
- 4mm stacking height
- Uses:
- 1 Serial for Serial RX
- 1 Serial for Telemetry
- 1 GPIO for Buzzer
Included
- 4 + 1 extra 4mm spacer
- 1 1x2 right angle tin for buzzer pins
- 3 1x2 straight pins to for mounting receiver